The working principle of the hydraulic rubber cutting machine

The working principle of the hydraulic rubber cutting machine is based on the pressure generated by the hydraulic system to drive the rubber cutting knife to perform the cutting action. The specific steps are as follows:

1. Adding materials: The operator places the raw rubber block or other plastic material under the rubber cutting knife.

2. Start the hydraulic system: By pressing the start button, the motor in the hydraulic system drives the vane pump through the coupling, and the hydraulic oil enters the upper chamber of the working cylinder through the reversing valve, generating pressure.

3. Cutting action: The pressure of the working oil cylinder pushes the rubber cutting knife to move downward, fall along the slide on the frame, and cut the rubber material.

4. Limit switch control: The frame is equipped with two upper and lower limit switches, which control the reversing valve to change the movement direction of the rubber cutting knife and protect the piston cylinder head.

5. Automatic return: After the rubber cutting knife completes cutting, it relies on the action of the hydraulic system to automatically return to the starting position and prepare for the next cutting.

6. Safe operation: Hydraulic glue cutting machines are usually equipped with safety devices, such as emergency stop switches, to ensure safe operation.

7. Versatility: The hydraulic rubber cutting machine can not only cut rubber, but also handle a variety of materials such as silicone, leather, cardboard, and plastic boards.

8. High efficiency and energy saving: The hydraulic glue cutting machine is easy to operate, has the characteristics of high efficiency and energy saving, high cost performance, and saves time and effort.

9. Automation: Some hydraulic glue cutting machines can realize automatic control to improve production efficiency and safety.

The hydraulic rubber cutting machine is designed to improve cutting efficiency and precision while simplifying the operating process and is suitable for cutting various plastic materials.